DESCRIPTION:
The Rohde & Schwarz RTH1034 is a high-performance four-channel handheld oscilloscope from the RTH Scope Rider family, providing 350 MHz bandwidth and four fully isolated input channels for advanced troubleshooting and diagnostics in industrial, electrical, and electronic environments. Combining the capabilities of a laboratory oscilloscope with the portability required for field operation, the RTH1034 is ideally suited for engineers and technicians working on complex multi-signal systems.
The instrument's fully isolated channel architecture enables safe floating measurements on power converters, industrial automation equipment, renewable energy systems, motor drives, communications infrastructure, electrical installations, and embedded electronic devices. Each channel is galvanically isolated, allowing simultaneous measurements at different voltage potentials while eliminating many of the grounding constraints associated with traditional oscilloscopes.
With a bandwidth of 350 MHz, sampling rates up to 5 GSa/s, and a 10-bit analog-to-digital converter, the RTH1034 delivers excellent waveform fidelity and measurement accuracy. High acquisition rates and deep memory enable engineers to capture transient events, intermittent faults, switching waveforms, communications signals, and complex control system behaviour with exceptional detail.
The four-channel configuration is particularly valuable when analysing multiple control signals, power stages, communication buses, sensor interfaces, and synchronised events simultaneously. This makes the RTH1034 highly effective for troubleshooting industrial automation systems, embedded designs, motor control applications, and power electronics.
A bright 7-inch capacitive touchscreen provides intuitive operation while dedicated hardware controls ensure efficient use in laboratory, workshop, and field environments. Battery-powered operation supports portable measurements, while the rugged IP51-rated housing is designed to withstand demanding industrial conditions.
Optional upgrades add protocol triggering and decoding, mixed-signal analysis, logic channels, harmonic analysis, spectrum analysis, advanced triggering functions, data logging, and wireless connectivity. With CAT IV 600 V and CAT III 1000 V safety ratings, the RTH1034 is designed for safe operation on industrial and electrical installations.
Keywords: Rohde & Schwarz RTH1034, 350 MHz handheld oscilloscope, four-channel oscilloscope, Scope Rider, isolated oscilloscope, industrial diagnostics
Rohde & Schwarz RTH 4-Channel Models
| Model | Bandwidth | Channels | Availability |
|---|---|---|---|
| RTH1004 | 60 MHz | 4 | Enquiry Only |
| RTH1014 | 100 MHz | 4 | Enquiry Only |
| RTH1024 | 200 MHz | 4 | Enquiry Only |
| RTH1034 | 350 MHz | 4 | Enquiry Only |
| RTH1054 | 500 MHz | 4 | Enquiry Only |
Technical Specifications
| Specification | RTH1034 |
|---|---|
| Oscilloscope Channels | 4 |
| Bandwidth | 350 MHz |
| Maximum Sample Rate | Up to 5 GSa/s |
| ADC Resolution | 10 Bit |
| Waveform Capture Rate | Up to 50,000 Waveforms/s |
| Memory Depth | Up to 500 kpoints |
| Input Sensitivity | 2 mV/div to 100 V/div |
| Input Isolation | Fully Isolated Channels |
| Safety Rating | CAT IV 600 V / CAT III 1000 V |
| Display | 7-inch Capacitive Touchscreen |
| Display Resolution | 800 × 480 Pixels |
| Battery Operation | More than 4 Hours |
| Connectivity | USB, LAN, Optional WLAN |
| Housing Protection | IP51 |
| Instrument Type | Handheld Oscilloscope |
Key Features
- 350 MHz bandwidth
- Four fully isolated input channels
- Up to 5 GSa/s sampling rate
- 10-bit ADC architecture
- Up to 50,000 waveforms per second acquisition rate
- Deep memory acquisition
- CAT IV 600 V and CAT III 1000 V safety ratings
- Rugged IP51-rated enclosure
- Battery-powered operation
- High-resolution capacitive touchscreen
- Optional mixed-signal analysis capability
- Optional protocol trigger and decode functions
- Optional spectrum analysis functionality
- USB and LAN connectivity
- Optional wireless connectivity
- Designed for industrial and field applications
Usage Suitability
The RTH1034 is ideally suited for industrial maintenance, electrical commissioning, power electronics development, communications system troubleshooting, embedded system debugging, automotive electronics testing, industrial automation diagnostics, inverter analysis, renewable energy systems, field service engineering, and multi-channel signal analysis applications requiring safe isolated measurements and 350 MHz bandwidth.
Need Assistance?
Complete the enquiry form, and one of our expert team members will be happy to assist you.